Blog / Nissan P0300 Random Misfire: Coils, Plugs, and When to Stop

Nissan P0300 Random Misfire: Coils, Plugs, and When to Stop

By Roberto Gil · · Updated Sep 26, 2026

Nissan P0300 Random Misfire: Coils, Plugs, and When to Stop

Nissan P0300 Random Misfire: Coils, Plugs, and When to Stop

Ignition coils on a Nissan four-cylinder engine with one coil unplugged and lifted

P0300 on a Nissan is usually spark or fuel, not 'the computer'

Random misfire means the engine is dumping unburned fuel. On many Nissan 4-cylinders the first look is coils and plugs, then vacuum / MAF.

Hands swapping an ignition coil pack on a Nissan engine under a work light

Related guide: 2019-2024 Nissan Altima - Ignition Coils — coil-swap test walkthrough for isolating the bad cylinder.

Order that saves money

  1. Scan. Note P0300 vs a single P0301–P0308.
  2. If one cylinder: swap that coil with another. If the misfire follows the coil, buy one coil, not four.
  3. Pull the plug. Oil-fouled = valve-cover gasket or PCV, not just 'new plugs.'
  4. Check for unmetered air (intake boot on many QR/MR engines).
  5. Direct-injection Nissan engines can carbon up. That is a shop job with a bore scope — do not DIY walnut-blast as a first guess.

Related guide: 2011-2017 Nissan Juke — Spark Plug Replacement DIY Guide — plug pull and inspection steps referenced in the order above.

Flashing light

Worn spark plug with carbon deposits next to a new spark plug on a workbench

Treat flashing P0300 as catalyst damage in progress. Ease off, no highway pulls, scan, then a technician if it will not clear after a basic coil/plug fix.

Safety: Informational DIY. EZ Car Fix is not a shop.

More articles