← Back to Audi TT RS Guides

2018–2022 Audi TT RS

2018-2022 Audi TT RS — Cabin Air Filter Replacement

By Ray Delgado ✓ Certified Mechanic · Published Sep 24, 2026 · Updated Oct 14, 2026

🔧 Easy 15–25 minutes $17 DIY

Save $106 by doing it yourself! Shop cost: $123

Quick answer: Cabin Air Filter Replacement on a 2018–2022 Audi TT RS is rated Easy and takes about 15–25 minutes. You'll need 3 tools for this job, and parts cost about $17. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$17.00
Part Name Part Number Price Buy
Cabin/pollen filter for 8S TT — $17.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Locate the filter in the passenger footwell

Sit in the passenger seat and look into the footwell beneath the glovebox for the felt trim panel. On the 8S TT (including TT RS) the cabin filter lives here, not under the hood.

2

Remove the footwell trim panel

Remove the fasteners holding the felt trim panel under the glovebox and lower the panel. The panel is flexible felt — lower it gently once the screws are out. Behind it you will see the rectangular plastic filter access door.

🔧 Mechanic's note — Tom Becker

I lower the felt panel gently once the screws are out — I've torn felt trim yanking it, and it never looks right after.

3

Open the filter access door

Release the clips or screws on the filter access door and open it. The door swings down or pulls away to reveal the edge of the old pollen filter.

4

Remove and inspect the old filter

Slide the old filter straight out of the housing and hold it up to the light — a clogged filter looks gray and packed with debris. Compare its size to the new filter to confirm you have the correct part.

5

Install the new cabin filter

Slide the new filter into the housing with the airflow arrows pointing in the same direction as the old one. It should glide in without resistance; if it binds, pull it back and realign it rather than forcing it.

🔧 Mechanic's note — Ray Delgado

I slide it in gently and realign if it binds — I've forced a cabin filter before, and the bent frame whistled for months.

6

Refit the trim panel and check it is secure

Close the access door until it clips shut, then reinstall the felt trim panel and its fasteners. Make sure the panel is secure and nothing hangs down into the footwell.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Tearing the felt footwell trim by yanking it instead of releasing its fasteners first.
  • • Installing the new filter backwards — match the airflow arrows to the old filter's direction.
  • • Forcing the filter into the housing and bending its frame, which lets unfiltered air bypass.
  • • Dropping the filter door screws into the footwell carpet where they are hard to find.