← Back to Dodge Charger Guides

2011–2023 Dodge Charger

2011-2023 Dodge Charger - Battery Replacement

πŸ”§πŸ”§ Moderate 30-60 minutes $140 DIY

Save $140 by doing it yourself! Shop cost: $280

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$155.00
Part Name Part Number Price Buy
Correct group-size battery β€” $140.00
Terminal cleaner β€” $8.00
Terminal protectant β€” $7.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

πŸ’‘ Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Prep and safety

Park on level ground, set the parking brake, and put on eye protection and gloves. Note radio presets and any settings that may reset when power is disconnected. Locate the battery (under-hood or trunk/under-seat β€” check the owner’s manual).

2

Disconnect and remove the old battery

Loosen the negative (βˆ’) terminal first and move the cable aside so it cannot spring back. Then loosen the positive (+). Remove the hold-down clamp/bracket. Lift the battery straight up β€” batteries are heavy; lift with your legs or use a battery strap.

3

Clean tray and install the new battery

Clean corrosion from the tray and cable ends with a terminal brush. Set the correct group-size battery in place with terminals oriented the same way. Reinstall and snug the hold-down so the battery cannot shift.

4

Reconnect and verify

Connect positive (+) first, then negative (βˆ’). Apply terminal protectant. Start the engine and confirm no warning lights that indicate a loose connection. Reset clock/radio as needed.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • β€’ Wrong group size
  • β€’ Connecting positive first on install
  • β€’ Skipping hold-down
  • β€’ Leaving memory settings unset after reconnect