← Back to Hyundai Venue Guides

2020–2024 Hyundai Venue

2020-2024 Hyundai Venue — Replace Wiper Blades

🔧 Easy 15 minutes $35 DIY 2 views

Save $65 by doing it yourself! Shop cost: $100

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$35.00
Part Name Part Number Price Buy
Front Windshield Wiper Blades — $20.00
Rear Windshield Wiper Blade — $15.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Service position (if needed)

Turn the ignition off. On many vehicles, briefly switch ignition on/off and pull the wiper stalk to park the arms in a raised service position. Otherwise carefully lift each arm by hand.

2

Lift the wiper arm

Lift the wiper arm off the glass until it stays up. Support it — never let a bare arm snap back onto the windshield or you can crack the glass.

3

Release the old blade

Locate the lock tab where the blade meets the arm (hook, pin, or bayonet). Press the tab and slide the blade off the arm. Note how the connector was oriented.

4

Match the new blade

Confirm the new blade length and connector type match the old one. Attach any adapter included with the new blade before installing.

5

Install until it clicks

Slide or clip the new blade onto the arm until you hear/feel a solid click. Tug gently to confirm it is locked.

6

Lower and repeat

Gently lower the arm onto the glass. Repeat for the other side (and rear wiper if equipped). Mist the glass and run the wipers to verify streak-free contact.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Forgetting to replace both wiper blades at the same time
  • • Installing the wrong size wiper blades
  • • Not properly securing the wiper blades after installation