Locate the air filter housing
Open the hood and locate the rectangular air filter housing, usually near the front of the engine bay connected to the intake tube.
2022–2025 Infiniti QX60
Save $75 by doing it yourself! Shop cost: $100
Click links to purchase (we earn from qualifying purchases)
| Part Name | Part Number | Price | Buy |
|---|---|---|---|
| Engine Air Filter | 16546-6JA0A | $25.00 |
About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.
💡 Pro tip: Order all parts at once to save on shipping
Follow these steps carefully
Open the hood and locate the rectangular air filter housing, usually near the front of the engine bay connected to the intake tube.
Release the metal clips, latches, or screws securing the housing lid. Some models use hose clamps on the intake tube — loosen only what is needed to open the lid.
Lift out the old engine air filter. Note the rubber seal orientation so the new filter seats the same way.
Wipe leaves, dirt, and debris from inside the box with a clean rag. Avoid pushing debris down the intake tract toward the throttle body.
Place the new filter into the housing, matching the old orientation. Ensure the seal sits evenly all around with no gaps or pinched edges.
Refit the lid, align the tabs, and resecure clips/screws/clamps. Confirm the intake tube is seated. Start the engine and listen for induction whistling that could indicate a poor seal.
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
2013–2021
2013–2021
2013–2021
2022–2025
2022–2025
2022–2025