← Back to Kia Sorento Guides

2016–2020 Kia Sorento

2016-2020 Kia Sorento - Engine Air Filter Replacement

🔧 Easy 10-20 minutes $20 DIY

Save $40 by doing it yourself! Shop cost: $60

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$20.00
Part Name Part Number Price Buy
Engine air filter — $20.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Prep and locate the air box

Park the 2017-2024 Kia Sorento on level ground, set the parking brake, and shut the engine off. Open the hood and locate the engine air filter housing, usually a black plastic box connected to the intake snorkel. Informational DIY — EZ Car Fix is not a shop.

2

Open the air filter housing

On the 2017-2024 Kia Sorento, release the metal clips, spring clamps, or screws securing the air-box lid. Lift the lid only as far as needed and keep fasteners organized so none fall into the engine bay.

3

Remove the old filter and clean

Lift the old engine air filter out of the Kia Sorento housing. Inspect the element for dirt, leaves, oil, or water, then wipe or carefully vacuum the housing while keeping debris away from the intake opening.

4

Install the new filter

Seat the new engine air filter in the 2017-2024 Kia Sorento housing with its rubber seal fully seated in the groove and its pleats oriented like the old filter. Check the entire perimeter for gaps before closing the lid.

5

Reseal and verify

Close the 2017-2024 Kia Sorento air-box lid evenly and refasten every clip or screw. Confirm the intake tube and sensor connections are snug, then start the engine and listen for an unusual induction whistle that could indicate a poor seal.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Installing the filter upside down or unseated so unfiltered air bypasses the element
  • • Leaving debris in the housing that then gets sucked into the intake
  • • Forcing clips/screws and cracking the plastic air box lid
  • • Reusing a heavily clogged filter instead of replacing it