← Back to Mercedes-Benz C-Class Guides

2012–2014 Mercedes-Benz C-Class

2012-2014 Mercedes-Benz C-Class W204 - Oil Pan Gasket Replacement

🔧🔧🔧 Advanced 2-3 hours $95 DIY 3 views

Save $305 by doing it yourself! Shop cost: $400

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$95.00
Part Name Part Number Price Buy
Oil Pan Gasket A2710101500 $50.00
Engine Oil (5W-30 Synthetic) MB229.5 $40.00
Oil Drain Plug Washer A2719970040 $5.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Prepare the Vehicle

Park on a level surface, engage the parking brake, and let the engine cool for at least 30 minutes. Gather all tools, oil, and filter. Informational DIY. EZ Car Fix is not a shop.

2

Lift and Secure the Vehicle

Use a floor jack to lift the front of the vehicle at the designated jacking points. Support with jack stands — never work under a vehicle supported only by a hydraulic jack.

3

Drain the Old Oil

Position the drain pan under the oil pan. Remove the drain plug with the appropriate socket. Allow all oil to fully drain — this may take 5–10 minutes.

4

Replace the Oil Filter

Locate the oil filter. Use an oil filter wrench to remove the old filter. Lubricate the new filter's rubber gasket with fresh oil, then install and hand-tighten.

5

Reinstall the Drain Plug

Install a new drain plug washer if applicable, then thread the drain plug back in by hand to avoid cross-threading. Torque to specification using a torque wrench.

6

Add New Oil and Verify

Lower the vehicle. Remove the oil filler cap, insert a funnel, and pour in the specified amount and viscosity of new oil. Start the engine, check for leaks, then check the dipstick level and top off as needed.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Not properly draining all engine oil before removal
  • • Failing to clean mating surfaces thoroughly before installing the new gasket
  • • Over-tightening the oil pan bolts, leading to gasket deformation