← Back to Nissan Ariya Guides

2022–2024 Nissan Ariya

2022-2024 Nissan Ariya Engage - Replace Cabin Air Filter

By Tom Becker ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026

🔧 Easy 10–15 minutes $25 DIY 2 views

Save $115 by doing it yourself! Shop cost: $140

Quick answer: Replace Cabin Air Filter on a 2022–2024 Nissan Ariya is rated Easy and takes about 10–15 minutes. You'll need 1 tool for this job, and parts cost about $25. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$25.00
Part Name Part Number Price Buy
Cabin Air Filter — $25.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Work on the passenger side with the car off

The Ariya's in-cabin microfilter sits behind the glove box on the passenger side. Power the car fully off first — there's no engine, but you don't want the climate system kicking on mid-swap. Open the passenger door and get comfortable.

2

Empty the glove box

Open the glove box and empty it completely. The box must swing all the way down; anything left inside will jam against the dash trim or fall into the footwell.

3

Unhook the damper arm if fitted

Look at the right side of the glove box for a small damper arm on a pivot. If fitted, slide it off and let it hang. Forgetting it on reassembly is the classic rookie mistake.

🔧 Mechanic's note — Tom Becker

On reassembly, hang the damper arm first, before you swing the box up. I've seen the arm's little pivot boss snapped clean off by people closing the box with it hanging loose — then the glove box slams open forever.

4

Release the stops and swing the box down

Press both sides of the glove box inward to release the stop tabs, then swing it down on its lower hinges. Don't force it past the hinges — it only needs to hang low enough to expose the filter housing.

5

Open the filter tray cover

Behind the opening is the filter housing with a clip-on cover. Squeeze its side tabs and pull the cover toward you, then slide the old filter out and note the airflow arrow's orientation.

6

Install the new filter and close the tray

Slide the new filter into the tray with its airflow arrow matching the old filter's orientation. Push the tray and cover back until the tabs click — a tray that isn't fully seated lets unfiltered air into the blower.

7

Reassemble and run the climate system

Lift the glove box, press the sides in so the stops catch, and re-hook the damper arm. Close the box, power the car on, and run heat and A/C through several fan speeds.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Letting the damper arm slip back into the dash cavity where it is hard to retrieve
  • • Installing the new filter with the airflow arrow reversed
  • • Not pushing the filter tray fully home before closing the cover