← Back to Saturn Sky Guides

2007–2009 Saturn Sky

2007-2009 Saturn Sky — Engine Oil & Filter Change

🔧🔧 Moderate 30-60 minutes $55 DIY

Save $65 by doing it yourself! Shop cost: $120

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$57.00
Part Name Part Number Price Buy
Correct engine oil and viscosity for 2007-2009 Saturn Sky; verify the owner-manual specification — $45.00
Correct engine oil filter and drain-plug washer for 2007-2009 Saturn Sky — $12.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Confirm oil specification and make the vehicle safe

Verify the exact engine, oil viscosity, capacity, filter, and drain-plug washer for the 2007-2009 Saturn Sky. Park level, set the brake, chock wheels, and use ramps or rated jack stands if access requires lifting.

2

Warm briefly and protect the work area

Run the 2007-2009 Saturn Sky only long enough to make the oil flow, then switch it off and wait briefly. Remove the oil fill cap, place a drain pan, and keep oil off tires and the ground.

3

Drain the used oil and replace the filter

Remove the drain plug carefully, let the 2007-2009 Saturn Sky drain fully, and replace the washer if required. Remove the old filter, confirm its gasket came off, lightly oil the new gasket, and install it by the specified hand-tight or torque procedure.

4

Install the correct oil quantity

Reinstall the drain plug to the exact engine-specific torque, add the specified oil through a funnel, and do not guess the capacity. Keep the fill cap and dipstick clean.

5

Check level, leaks, and service reminder

Start the 2007-2009 Saturn Sky briefly, switch it off, wait, and recheck the level on level ground. Inspect the plug and filter for leaks, reset the service reminder only as appropriate, and record the date and mileage.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Using the wrong viscosity, capacity, or filter
  • • Working under a vehicle supported only by a jack
  • • Reusing a crushed drain-plug washer or leaving the old filter gasket stuck
  • • Over-tightening the filter or drain plug
  • • Starting the engine before checking the oil level and leaks