← Back to Subaru Outback Guides

2015–2019 Subaru Outback

2015-2019 Subaru Outback - Wiper Blade Replacement

🔧 Easy 10-15 minutes $25 DIY

Save $35 by doing it yourself! Shop cost: $60

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$25.00
Part Name Part Number Price Buy
Wiper blades (correct length/clip) — $25.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Lift the wiper arm

On the 2015-2019 Subaru Outback, lift the wiper arm away from the glass until it locks upright. Support it so it cannot snap back. Informational DIY — EZ Car Fix is not a shop.

2

Release the old blade

Locate the release tab or clip on the Subaru Outback blade. Press it and slide the blade off the hook, pin, or bayonet mount. Keep a hand on the arm.

3

Install the new blade

Match the adapter to your Subaru Outback arm type. Slide the new blade on until it clicks firmly. Tug gently to confirm it is locked.

4

Lower, repeat, and test

Gently lower the arm onto the glass. Repeat for the other side (and rear if the Subaru Outback is equipped). Spray washer fluid and run the wipers to verify a clean, streak-free wipe.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Buying the wrong length or clip adapter
  • • Letting the arm slam the windshield
  • • Installing the blade upside down
  • • Forgetting the rear wiper on SUVs/hatchbacks