2016–2022 Toyota Prius
Save $95 by doing it yourself! Shop cost: $120
Click links to purchase (we earn from qualifying purchases)
| Part Name | Part Number | Price | Buy |
|---|---|---|---|
| OBD2 scanner | — | $25.00 |
About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.
💡 Pro tip: Order all parts at once to save on shipping
Follow these steps carefully
Determine whether the check-engine light on the 2010-2016 Toyota Prius is steady or flashing. A flashing lamp, severe shaking, overheating, or loss of power calls for stopping safely rather than continuing a DIY scan.
Turn the ignition off, locate the diagnostic-link connector under the the 2010-2016 Toyota Prius dashboard, and plug in a compatible OBD-II scanner without forcing it.
Run a full scan on the 2010-2016 Toyota Prius. Record confirmed, pending, and permanent codes plus freeze-frame data such as RPM, coolant temperature, and speed before clearing anything.
Use the code and freeze-frame clues to inspect the 2010-2016 Toyota Prius wiring, connectors, fuses, intake hoses, fuel cap, fluid leaks, and vacuum or exhaust leaks. A code identifies a monitored fault, not automatically a failed component.
After correcting the root cause on the 2010-2016 Toyota Prius, clear codes only if appropriate, complete a normal drive cycle, and rescan for returning codes or readiness-monitor issues.
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
2004–2009
2004–2009
2004–2009
2010–2015
2010–2015
2010–2015