← Back to Audi A4 Guides

2017–2024 Audi A4

2017–2024 Audi A4/Q5 - DIY Turbocharger Replacement

🔧🔧🔧 Advanced 4-6 hours $800 DIY 1 views

Save $700 by doing it yourself! Shop cost: $1,500

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$765.99
Part Name Part Number Price Buy
Replacement Turbocharger — $685.99
Turbocharger Gasket Set — $50.00
Oil Return Line Gasket 06H145735A $15.00
Coolant Return Line Gasket — $15.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Disconnect the battery and let the turbo cool

Park the 2017–2024-2024 Audi A4/Q5 on level ground and allow the turbo and exhaust to cool completely — burns are common. Disconnect the negative battery cable. Wear gloves and eye protection. Support the vehicle if underbody access is required.

2

Remove intake, charge pipes, and heat shields

Remove the engine cover, intake tubing, and charge/boost pipes connected to the turbo on the 2017–2024-2024 Audi A4/Q5. Label vacuum/solenoid hoses and electrical connectors (wastegate, VGT, speed sensor). Remove heat shields and exhaust downpipe fasteners as needed.

3

Disconnect oil/coolant lines and unbolt the turbo

Place drain pans under oil and coolant feed/return lines. Disconnect the lines and cap them to keep debris out of the 2017–2024-2024 Audi A4/Q5 engine. Unbolt the turbo from the exhaust manifold or integrated housing and remove it carefully — it is heavy and awkward.

4

Compare and prep the new turbo

Match flange, compressor outlet, and actuator style to the old unit. Prime the new turbo with clean engine oil through the oil feed port and hand-spin the shaft. Replace gaskets, oil-feed restrictor (if equipped), and any crushed crush washers on the 2017–2024-2024 Audi A4/Q5. Inspect the downpipe and intake for oil/debris.

5

Install the new turbo and reconnect lines

Install new gaskets dry (unless specified otherwise). Mount the turbo, torque fasteners in the specified sequence, and reconnect oil then coolant lines with new seals. Reattach the downpipe, charge pipes, sensors, and heat shields on the 2017–2024-2024 Audi A4/Q5. Do not use silicone on oil-gasket faces.

6

Refill fluids, prime oil, and break-in gently

Refill coolant and oil if drained. Reconnect the battery. Crank without starting (or follow the maker’s prime procedure) until oil pressure builds. Start the 2017–2024-2024 Audi A4/Q5, check for boost/exhaust/oil leaks, and idle until warm. Avoid high boost for the first short drive; clear codes and verify boost control.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Not properly supporting the engine during turbo removal
  • • Failing to replace all gaskets and seals
  • • Over-tightening turbo mounting bolts
  • • Neglecting to properly torque turbocharger bolts
  • • Not priming the turbocharger before starting the engine