2020–2024 BMW X6
By Ray Delgado ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Nov 6, 2026
Save $72 by doing it yourself! Shop cost: $100
Quick answer: Cabin Air Filter Replacement on a 2020–2024 BMW X6 is rated Easy and takes about 25 minutes. You'll need 1 tool for this job, and parts cost about $28. This guide walks you through the full job step by step, including the mistakes to avoid.
| Part Name | Part Number | Price | Buy |
|---|---|---|---|
| Cabin air filters (pair) for 2020-2024 BMW X6; verify arrows, size, and VIN/trim fitment | — | $28.00 |
About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.
💡 Pro tip: Order all parts at once to save on shipping
Follow these steps carefully
The 2020–2024 X6 (G06) uses two charcoal panel filters under the passenger footwell, by the blower. There's no pollen filter under the cowl, and with no third row there's no secondary cargo filter either. Ignition off, key out of proximity.
Slide the passenger seat back and lay a towel on the door sill — the aluminum trim needs protection. You'll be lying half in, half out under the dash; wear a headlamp. Keep the ignition off the whole time.
Two thumb screws hold the panel under the glove box — rotate each 90 degrees to release. Pull the front edge down; the rear edge rides on guide hooks. Before it's away, disconnect the footwell-light plug and unclip its retainer.
Remove the two Torx bolts on the filter-housing lid (T15/T20 covers the range) and pull the drain tube off — don't touch the fuse box. Set the lid aside where nothing rolls under the seat; the filters may drop out.
I treat the fuse box like a sleeping dog — don't poke it. You only need the lid, and one bumped fuse can kill your blower or dash lights. Fingertips only near that box.
Pull both filters out. They're airflow-specific and can sit mirrored, so study each one's orientation — a phone photo is the best reference. Lay old and new side by side to confirm matching footprint and thickness, then vacuum the housing.
Bow each filter past the lip and let it flatten in the same orientation. Seat each home — no corner below the edge. Refit the drain tube and lid, snugging the Torx bolts; stop at snug, the threads are plastic.
In my experience, That whistle at high fan speed is the classic tell of a filter corner hanging below the edge. If you hear it, don't ignore it — pop the lid and reseat; it takes two minutes.
Reconnect the footwell-light plug and clip, engage the rear guide hooks, and swing the front edge up until both thumb screws lock. Sweep the fan low to maximum in fresh-air and recirculation, checking for even airflow and listening for whistling.
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
2020–2024
2020–2024
2020–2024
2008–2019
2008–2019
2008–2019
Acura CL · 2001–2003
Acura ILX · 2013–2022
Acura Integra · 2023–2026
Acura RDX · 2010–2012
Acura RDX · 2019–2024
Acura RL · 2005–2012
Acura RLX · 2014–2020
Acura RSX · 2002–2006
