Prepare the vehicle
Power windows down, radio code noted if needed, hood open, eye protection on. Note any IBS (battery monitoring) sensor on the negative cable.
2018–2024 Jeep Wrangler
Save $100 by doing it yourself! Shop cost: $250
Click links to purchase (we earn from qualifying purchases)
| Part Name | Part Number | Price | Buy |
|---|---|---|---|
| Group-size battery (match your tray) | — | $140.00 |
About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.
💡 Pro tip: Order all parts at once to save on shipping
Follow these steps carefully
Power windows down, radio code noted if needed, hood open, eye protection on. Note any IBS (battery monitoring) sensor on the negative cable.
Loosen and remove the negative (-) terminal first, then the positive (+). This prevents shorting if your wrench touches the body.
Remove the battery hold-down clamp or J-clamp. Note the group size and terminal orientation before lifting the battery out.
Clean the tray and terminal posts with a wire brush and terminal cleaner. Inspect the cables for corrosion or damage.
Place the new battery matching group size and terminal type. Secure the hold-down. Connect positive (+) first, then negative (-).
Register or reset the battery monitoring system if the manual or a scan tool says to. Some vehicles learn the new battery's current draw.
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
2007–2011
2007–2011
2007–2011
2007–2011
2007–2011
2007–2011