← Back to Toyota Corolla Guides

2014–2019 Toyota Corolla

2014-2019 Toyota Corolla - Wiper Blade Replacement

🔧 Easy 10-15 minutes $25 DIY

Save $35 by doing it yourself! Shop cost: $60

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$25.00
Part Name Part Number Price Buy
Wiper blades (correct length/clip) — $25.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Lift the wiper arm

On the 2014-2019 Toyota Corolla, lift the wiper arm away from the glass until it locks upright. Support it so it cannot snap back. Informational DIY — EZ Car Fix is not a shop.

2

Release the old blade

Locate the release tab or clip on the blade. Press it and slide the blade off the hook, pin, or bayonet mount. Keep a hand on the arm.

3

Install the new blade

Match the adapter to your arm type. Slide the new blade on until it clicks firmly. Tug gently to confirm it is locked.

4

Lower, repeat, and test

Gently lower the arm onto the glass. Repeat for the other side (and rear if equipped). Spray washer fluid and run the wipers to verify a clean, streak-free wipe.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Buying the wrong length or clip adapter
  • • Letting the arm slam the windshield
  • • Installing the blade upside down
  • • Forgetting the rear wiper on SUVs/hatchbacks