← Back to Chevrolet Silverado 1500 Guides

2007–2013 Chevrolet Silverado 1500

2007-2013 Chevrolet Silverado - Battery Replacement

🔧 Easy 20 minutes $125 DIY 2 views

Save $100 by doing it yourself! Shop cost: $225

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$125.00
Part Name Part Number Price Buy
Group 65 Battery — $120.00
Battery Terminal Protector Spray — $5.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Safety Prep

Turn off engine and all accessories. Remove jewelry. Put on safety glasses.

2

Disconnect Negative First

Always remove negative (black) terminal FIRST. Loosen 10mm nut and wiggle terminal off. Keep away from positive.

3

Disconnect Positive

Remove positive (red) terminal. Remove battery hold-down bracket.

4

Remove Old Battery

Lift battery straight up. Batteries are heavy (40+ lbs) - use proper lifting technique.

5

Clean Terminals

Use a wire brush and terminal cleaner to remove corrosion from the cable ends and the battery tray. Heavy green or white buildup dissolves with a baking-soda-and-water paste before brushing — corrosion left behind causes voltage drops and hard-start complaints.

6

Install New Battery

Place new battery in tray. Reinstall hold-down. Connect positive FIRST, then negative. Apply terminal protector spray.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Removing positive terminal first (can cause sparks/shorts)
  • • Not cleaning terminals before installing new battery
  • • Crossing positive and negative cables