2016–2021 Hyundai Tucson
Save $275 by doing it yourself! Shop cost: $350
Click links to purchase (we earn from qualifying purchases)
| Part Name | Part Number | Price | Buy |
|---|---|---|---|
| Replacement ignition coil; verify engine, cylinder, and connector by VIN | — | $75.00 |
About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.
💡 Pro tip: Order all parts at once to save on shipping
Follow these steps carefully
Scan the 2016-2021 Hyundai Tucson for DTCs and identify the cylinder. Inspect the spark plug, coil boot, connector, harness, injector, intake leaks, and compression before condemning the coil; swap-test only when safe and appropriate.
Park the 2016-2021 Hyundai Tucson on level ground, set the parking brake, switch the ignition off, let the engine cool, and disconnect the negative battery cable if required by the service procedure. Keep clear of EV/high-voltage parts.
Remove the engine cover, intake duct, or other access pieces needed to reach the 2016-2021 Hyundai Tucson ignition coils. On V6 engines, follow the engine-specific procedure for any upper intake manifold or rear-bank access.
Photograph the 2016-2021 Hyundai Tucson coil layout. Press the connector lock and unplug the suspect coil without pulling on the wires. Blow debris away from the coil and bolt before removal.
Remove the 2016-2021 Hyundai Tucson coil retaining bolt with the correct socket, then twist and lift the coil straight out. Inspect the boot, plug well, connector, and nearby wiring for oil, moisture, cracking, or carbon tracking.
Compare the new coil with the removed 2016-2021 Hyundai Tucson part, apply only a small amount of dielectric grease inside the boot if specified, seat it fully over the spark plug, start the bolt by hand, and tighten to the exact engine-specific torque.
Reconnect the 2016-2021 Hyundai Tucson coil connector until it locks, reinstall all covers and intake parts, reconnect the battery if disconnected, clear codes only after recording them, start the engine, and road-test while checking for repeat misfire codes.
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
2016–2021
2010–2015
2016–2021
2010–2015
2010–2015
2016–2021