EZCarFix DIY Auto Repair
← Back to Fiat 500X Guides

2016–2021 Fiat 500X

2016-2021 Fiat 500X — Spark Plug Replacement

By Tom Becker ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026

🔧🔧🔧 Advanced 45 minutes to 1.5 hours $115 DIY

Save $335 by doing it yourself! Shop cost: $450

Quick answer: Spark Plug Replacement on a 2016–2021 Fiat 500X is rated Advanced and takes about 45 minutes to 1.5 hours. You'll need 7 tools for this job, and parts cost about $115. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$115.00
Part Name Part Number Price Buy
Correct spark plug set for the gasoline/ICE engine in 2016-2021 Fiat 500X; verify engine, heat range, gap, and VIN fitment — $115.00
Coil-boot seals or ignition coils only if inspection finds damage Optional — $35.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Pull the engine cover and find the four pencil coils

Let the engine cool fully, then pop the hood and pull the plastic engine cover straight up off its mounting grommets. Depending on year, your 500X runs the 1.4L MultiAir turbo, the 1.3L turbo (2019 and up), or the 2.4L Tigershark.

2

Disconnect each coil and remove its hold-down bolt

Squeeze the locking tab on each coil's electrical connector and rock it off — don't yank the wiring. Each coil is held by a single small bolt (10mm); remove the bolt and set it in a tray.

3

Lift the coils and check the tubes for oil

Pull each coil with a slow twist and shine a flashlight down each tube. The 1.4L is known for oil seeping past the tube seals — an oil-soaked coil boot means the seals are due, a valve-cover-gasket-plus-seals job, not just plugs.

4

Blow out the wells and spin the old plugs out

Blow compressed air down each tube to clear grit first. Drop a 5/8-inch (16mm) plug socket on a long extension down the tube, crack the plug loose, and spin it out. Keep the ratchet straight to avoid side-loading the ceramic.

5

Set the gap from the manual, not the forums

Check each new plug's gap with a feeler gauge against your manual or the emissions sticker. If a plug needs adjusting, move the ground strap gently with the gauge tool — never lever against the center electrode or its precious-metal tip.

🔧 Mechanic's note — Ray Delgado

I check the gap on every 500X plug straight out of the box with a feeler gauge against the manual's number — shipping knocks pre-gapped plugs around. If one needs adjusting, I move the ground strap gently and never touch the center electrode.

6

Hand-thread the new plugs and reseat the coils

Lower each plug into its tube on the socket and thread it in by hand until the washer seats. Slide each coil back down its tube, reinstall the 10mm bolts, and click the connectors home.

🔧 Mechanic's note — Ray Delgado

I thread plugs by hand with just the extension, no ratchet attached. The instant you feel anything but smooth resistance, back it out — a cross-threaded plug hole turns a Saturday job into a machine-shop bill.

7

Reconnect, start up, and verify a smooth idle

Reconnect the battery and start the engine — it should idle smoothly within seconds. A flashing check-engine light or rough stumble means a coil connector isn't seated; shut it down and recheck each one.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Trusting forum gap numbers for the 1.4T instead of the manual — owners report everything from 0.026 to 0.039 inch, so go by your owner's manual or the under-hood sticker.
  • • Pulling a coil by its wiring instead of the body — the pencil coils are long and the connector tabs are brittle with age.
  • • Reinstalling the coils without checking the tubes for oil — a leaking tube seal will foul the new plug's boot within weeks.