← Back to Ford F-150 Guides

2015–2020 Ford F-150

2015-2020 Ford F-150 5.0L V8 - Oil Change Complete Tutorial

🔧🔧 Moderate 1 hour $35 DIY 1 views

Save $65 by doing it yourself! Shop cost: $100

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$35.00
Part Name Part Number Price Buy
Motorcraft SAE 5W-20 Synthetic Blend Motor Oil XO-5W20-QSP $25.00
Motorcraft Oil Filter FL-500S FL-500S $10.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Prepare the Vehicle

Park on a level surface, engage the parking brake, and let the engine cool for at least 30 minutes. Gather all tools, oil, and filter. Informational DIY. EZ Car Fix is not a shop.

2

Lift and Secure the Vehicle

Use a floor jack to lift the front of the vehicle at the designated jacking points. Support with jack stands — never work under a vehicle supported only by a hydraulic jack.

3

Drain the Old Oil

Position the drain pan under the oil pan. Remove the drain plug with the appropriate socket. Allow all oil to fully drain — this may take 5–10 minutes.

4

Replace the Oil Filter

Locate the oil filter. Use an oil filter wrench to remove the old filter. Lubricate the new filter's rubber gasket with fresh oil, then install and hand-tighten.

5

Reinstall the Drain Plug

Install a new drain plug washer if applicable, then thread the drain plug back in by hand to avoid cross-threading. Torque to specification using a torque wrench.

6

Add New Oil and Verify

Lower the vehicle. Remove the oil filler cap, insert a funnel, and pour in the specified amount and viscosity of new oil. Start the engine, check for leaks, then check the dipstick level and top off as needed.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Not allowing the engine to cool before starting the oil change
  • • Over-tightening the oil filter during installation
  • • Failing to properly dispose of the used oil