← Back to Ford F-150 Guides

2015–2020 Ford F-150

2015-2020 Ford F-150 - Engine Air Filter Replacement

🔧 Easy 30 minutes $35 DIY 2 views

Save $65 by doing it yourself! Shop cost: $100

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$35.00
Part Name Part Number Price Buy
Engine Air Filter — $20.00
Air Filter Housing Gasket F2GZ-9C968-A $5.00
Air Filter Housing Clamp F2GZ-9C968-B $10.00

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Locate the air filter housing

Open the hood and locate the rectangular air filter housing, usually near the front of the engine bay connected to the intake tube.

2

Open the housing

Release the metal clips, latches, or screws securing the housing lid. Some models use hose clamps on the intake tube — loosen only what is needed to open the lid.

3

Remove the old filter

Lift out the old engine air filter. Note the rubber seal orientation so the new filter seats the same way.

4

Clean the housing

Wipe leaves, dirt, and debris from inside the box with a clean rag. Avoid pushing debris down the intake tract toward the throttle body.

5

Install the new filter

Place the new filter into the housing, matching the old orientation. Ensure the seal sits evenly all around with no gaps or pinched edges.

6

Close and secure

Refit the lid, align the tabs, and resecure clips/screws/clamps. Confirm the intake tube is seated. Start the engine and listen for induction whistling that could indicate a poor seal.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Forgetting to disconnect the battery before starting the repair
  • • Using an incorrect replacement filter size
  • • Not properly sealing the air filter housing after replacement