2023–2024 Kia Sportage
Save $430 by doing it yourself! Shop cost: $650
Click links to purchase (we earn from qualifying purchases)
| Part Name | Part Number | Price | Buy |
|---|---|---|---|
| Replacement starter motor | — | $220.00 | |
| Starter terminal hardware or heat shield fasteners (if needed) | — | $20.00 |
About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.
💡 Pro tip: Order all parts at once to save on shipping
Follow these steps carefully
Park the 2023-2024 Kia Sportage safely, set the parking brake, and switch the ignition off. Verify the battery is charged and test battery voltage, cable voltage drop, grounds, fuses, relay, and the start signal before replacing the starter. A click or no-crank symptom can also come from a weak battery or bad connection.
Disconnect the negative (−) battery cable on the 2023-2024 Kia Sportage first and isolate it so it cannot touch the post. Locate the starter at the engine/transmission bellhousing and remove only the intake duct, splash shield, skid plate, or heat shield needed for safe access. If working below, raise and support the vehicle on rated jack stands.
Photograph the 2023-2024 Kia Sportage starter connections before removal. Remove the nut and main B+ cable, then unplug or remove the solenoid trigger wire. Keep the energized cable insulated from ground and inspect the terminals for heat damage, corrosion, or loose crimps.
Support the starter on the 2023-2024 Kia Sportage while removing its mounting bolts. Lower or maneuver it out without stressing nearby wiring. Compare the replacement with the old unit for mounting ears, nose length, gear, solenoid clocking, connector locations, and any heat shield or bracket that must transfer.
Fit the replacement starter to the 2023-2024 Kia Sportage bellhousing, start every mounting bolt by hand, and tighten evenly to the manufacturer specification. Reinstall any alignment dowel, bracket, or heat shield. Reconnect the solenoid trigger wire and B+ cable with clean, tight terminals, but do not overtighten the terminal stud.
Reconnect the negative battery cable on the 2023-2024 Kia Sportage, reinstall shields and intake parts, and check that wiring is clear of moving or hot components. Attempt a start from a safe position; the engine should crank smoothly without grinding. Stop and recheck diagnosis or wiring if the symptom remains.
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
2011–2016
2011–2016
2017–2022
2017–2022
2017–2022
2011–2016