EZCarFix DIY Auto Repair
← Back to Suzuki Swift Guides

1995–2001 Suzuki Swift

1995-2001 Suzuki Swift — Spark Plug Replacement

By Tom Becker ✓ Certified Mechanic · Published Sep 24, 2026 · Updated Oct 14, 2026

🔧 Easy 30–60 minutes $23 DIY

Save $321 by doing it yourself! Shop cost: $344

Quick answer: Spark Plug Replacement on a 1995–2001 Suzuki Swift is rated Easy and takes about 30–60 minutes. You'll need 5 tools for this job, and parts cost about $23. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$23.00
Part Name Part Number Price Buy
NGK BPR6ES spark plugs (4) — $15.00
Dielectric grease — $8.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Remove the first plug lead

With the G13BA engine cold, remove the plug leads one at a time by gripping each boot and twisting gently. Mark each lead's cylinder if you remove more than one at once.

2

Clear debris and remove the old plug

Blow or brush dirt away from the plug well so nothing falls into the cylinder. Remove the plug with a 5/8-inch spark plug socket and extension. Inspect the old plug's color; a tan insulator indicates healthy combustion on that cylinder.

3

Gap and install the new NGK plug

Confirm the new NGK BPR6ES plug and check its gap against the underhood label. Thread it in by hand for several full turns to guarantee it is not cross-threaded. Tighten with a torque wrench to the specified value.

🔧 Mechanic's note — Ray Delgado

I thread the plug in by hand for several full turns before touching the wrench — on these small aluminum heads, I've learned one cross-threaded turn ruins my afternoon.

4

Refit the lead and repeat per cylinder

Dab dielectric grease inside the plug lead boot and push it firmly onto the plug until it seats. Tug the boot gently to confirm it's locked on. Repeat for the remaining three cylinders.

5

Verify leads and test-drive

Double-check all four leads are fully seated and routed away from hot or moving parts. Start the engine and listen for a smooth idle. Take a short drive to confirm clean acceleration with no hesitation or misfire.

6

Final check

After the test drive, visually check that no lead has worked loose from engine vibration. If the check-engine light appears, reseat each boot and confirm the firing order matches the original routing.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Using the wrong plug type instead of the specified NGK BPR6ES, causing poor running on the G13BA.
  • • Cross-threading a plug by starting it with a ratchet instead of fingers.
  • • Forgetting to reconnect a plug lead fully, creating an intermittent misfire.