← Back to BMW X1 Guides

2016–2024 BMW X1

2016-2024 BMW X1 - Engine Air Filter Replacement

By Ray Delgado ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026

🔧 Easy 10-20 minutes $20 DIY

Save $70 by doing it yourself! Shop cost: $90

Quick answer: Engine Air Filter Replacement on a 2016–2024 BMW X1 is rated Easy and takes about 10-20 minutes. You'll need 2 tools for this job, and parts cost about $20. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$20.00
Part Name Part Number Price Buy
Engine air filter — $20.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Prep and locate the air box

Park on level ground, brake set, engine off and cool. Find the airbox — the black plastic housing near the front grille area. The OE filter is BMW part 13718513944. Lift the engine cover first if it overhangs the box.

2

Open the air filter housing

Release the lid's screws or clips and lift it straight up. Note the airflow arrow before pulling the filter and match it on install. Keep the cover's rubber grommets with the cover — they pop off and roll away.

🔧 Mechanic's note — Tom Becker

In my experience, Pull the engine cover straight up slowly — those rubber grommets pop off their posts the second you rush, and they love rolling under the cowl.

3

Remove the old filter and clean

Lift the filter out and confirm the new one matches. Vacuum the box and wipe the sealing lip, keeping debris out of the intake. Check the lid's gasket for flattening — a tired gasket leaks dust past a fresh filter.

4

Install the new filter

Seat the new filter with the airflow arrow pointing the correct way and the rubber seal in the groove. Press it flat — no force needed. A backward filter still fits but filters poorly and can whistle.

🔧 Mechanic's note — Ray Delgado

If the airflow arrow wore off the old filter, remember: the wide sealing edge goes down on this box. Ask me how many I installed upside-down before that stuck.

5

Reseal and verify

Lower the lid, secure the screws or clips, and confirm an even seal. Refit the engine cover. Start the engine and listen for whistling — a quiet, steady idle means you're done. A backward filter can cause lean-running codes.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Installing the filter upside down or unseated so unfiltered air bypasses the element
  • • Leaving debris in the housing that then gets sucked into the intake
  • • Forcing clips/screws and cracking the plastic air box lid
  • • Reusing a heavily clogged filter instead of replacing it