← Back to Chevrolet Silverado 1500 Guides

2019–2024 Chevrolet Silverado 1500

2019-2024 Chevrolet Silverado - Brake Pads

🔧🔧 Moderate 1-2 hours $100 DIY

Save $200 by doing it yourself! Shop cost: $300

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$65.00
Part Name Part Number Price Buy
Front brake pads — $50.00
Brake hardware kit — $15.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Remove the wheel

Loosen lugs, jack up the vehicle, support on stands, and remove the wheel. Never work under a vehicle supported only by a jack.

2

Remove the caliper

Unbolt the caliper from the knuckle or slides. Hang it with wire — do not let it dangle on the hose.

3

Compress the piston

Push the piston back with a C-clamp or pad tool. On electronic-park models, you may need to power-retract or the piston will fight you.

4

Replace hardware

Replace slides, abutments, and clips if they are rusty. Clean the caliper bracket with brake cleaner and a wire brush.

5

Install new pads

Install the new pads into the clips, reinstall the caliper, and torque the caliper bolts to spec.

6

Reinstall and pump

Put the wheel back on, torque lugs to spec, lower the vehicle, and pump the brake pedal to the floor before driving. First stops will feel long until the piston closes.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Letting the caliper hang on the hose
  • • Not replacing rusty hardware
  • • Forgetting to pump the pedal
  • • Overtightening caliper bolts