← Back to Chevrolet Spark Guides

2016–2022 Chevrolet Spark

2016-2022 Chevrolet Spark — Cabin Air Filter Replacement

By Tom Becker ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026

🔧 Easy 10-15 minutes $28 DIY

Save $72 by doing it yourself! Shop cost: $100

Quick answer: Cabin Air Filter Replacement on a 2016–2022 Chevrolet Spark is rated Easy and takes about 10-15 minutes. Parts cost about $28. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$28.00
Part Name Part Number Price Buy
Cabin air filter for 2016-2022 Chevrolet Spark; verify arrows, size, and VIN/trim fitment — $28.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Park, switch off, and empty the glove box

Park on level ground, switch the ignition off, and slide the passenger seat back for working room. Open the glove box and take everything out of it.

2

Squeeze the sides and let the box swing down

Press both side walls of the glove box inward with your palms. The little stop tabs will clear the dashboard opening, and the box pivots down on its bottom hinges toward the floor. Don't force it past where it naturally stops.

🔧 Mechanic's note — Tom Becker

I stop when I'm tired. Fatigue causes the mistakes that turn a Saturday job into a Sunday problem. I chock the wheels even on flat ground. Parking brakes fail, and rolling cars crush.

3

Find the filter access door on the HVAC housing

It's easy to miss in the shadows, so shine a flashlight up in there. This door is the only thing between you and the filter - no screws, no panels, no fasteners to lose.

4

Open the door and pull the old filter

Press the finger tabs and swing the access door open. Slide the old filter straight out toward you. Check the airflow arrow printed on its frame and note the direction before it leaves your hand.

5

Fit the new filter, arrow matched

Slide the new filter into the slot in the same orientation as the old one - airflow arrow pointing the same way. It should seat fully flush with no corner sticking out. If it won't go, it's backwards - flip it, don't force it.

6

Close the access door and rehang the glove box

Swing the access door shut until its finger tabs click and it sits flat - a door left ajar will buzz at high fan speed. Lift the glove box back up and push it past the side stops until they click into place.

7

Run the HVAC and check the result

Start the car, set the system to fresh air, and run the fan from low to max through the dash, floor, and defrost vents. Listen for any new whistling or buzzing from behind the dash, which means the access door isn't fully latched.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Forcing the filter into the slot backwards instead of flipping it when it binds - the tight fit makes the wrong direction feel almost right.
  • • Leaving the access door's finger tabs unlatched, which causes a buzz at high fan speed.
  • • Not pushing the glove box fully past its side stops, so it drops open over the first bump.