2011–2024 Dodge Durango

2011-2024 Dodge Durango - Engine Air Filter Replacement

By Ray Delgado ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026

🔧 Easy 10-20 minutes $20 DIY

Save $45 by doing it yourself! Shop cost: $65

Quick answer: Engine Air Filter Replacement on a 2011–2024 Dodge Durango is rated Easy and takes about 10-20 minutes. You'll need 1 tool for this job, and parts cost about $20. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost

$20.00

Part Name	Part Number	Price	Buy
Engine air filter	—	$20.00	Amazon

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

Park and let the engine cool

Park on level ground, parking brake set, engine off; let it cool — the 3.6L V6 and especially the 5.7L V8 hold a lot of underhood heat.

Open the air filter housing

Loosen the hose clamp on the airbox side of the intake tube so the upper half of the box can move. Then release the clips or screws holding the lid, noting how each fastener engages before removal.

Remove the old filter and clean

Lift the upper half of the airbox straight up and off. Lift out the old filter, noting orientation. Vacuum grit from the lower box, keeping debris out of the intake. Check the MAF area on the intake tube for contamination while the box is open.

Install the new filter

Set the new filter into the lower box as the old one sat, pressing it down so the gasket sits flat and fully captured with no gaps along the edges. Confirm the element matches the housing before closing up.

Reseal and verify

Set the upper half back down squarely and refasten every clip or screw, then re-tighten the intake tube clamp and re-seat the breather line anchor on the lid. Work the hood seal back onto the cleat at the inlet.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

• Installing the filter upside down or unseated so unfiltered air bypasses the element
• Leaving debris in the housing that then gets sucked into the intake
• Forcing clips/screws and cracking the plastic air box lid
• Reusing a heavily clogged filter instead of replacing it