← Back to Nissan Murano Guides

2003–2007 Nissan Murano

2003-2007 Nissan Murano — Wiper Blade Replacement

🔧 Easy 10-20 minutes $35 DIY

Save $25 by doing it yourself! Shop cost: $60

Quick Video Tutorial

Parts You Need

Total Cost
$0.00
Part Name Part Number Price Buy
Driver wiper blade, 26" Bosch 26A —
Passenger wiper blade, 18" Bosch 18B —
Rear wiper blade, 14" — —

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Get the right blades: 26" driver, 18" passenger

The 2003-2007 Nissan Murano takes a 26-inch blade on the driver side and a 18-inch blade on the passenger side. It also has a 14-inch rear wiper blade. 2003-2005 models take a 19-inch passenger blade; 2006 and later take 18-inch.

2

Protect the glass

Lift one arm on the 2003-2007 Nissan Murano at a time and place a folded towel on the windshield. Never allow a bare spring-loaded arm to snap onto the glass.

3

Remove the old blade

Release the locking tab or pin on the 2003-2007 Nissan Murano and slide the old blade off without bending the arm. Retain any vehicle-specific adapter that the new blade requires.

4

Install and lock the new blade

Slide the correct blade onto the arm of the 2003-2007 Nissan Murano until the latch clicks, then tug lightly to confirm it is locked and rests in the original position.

5

Test with washer fluid

Lower the arm gently, fill or check washer fluid, and test the 2003-2007 Nissan Murano on wet glass. Replace a damaged arm or investigate streaking caused by glass contamination or linkage problems.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Guessing blade lengths or connector type
  • • Letting the bare arm strike the windshield
  • • Installing the blade backward or leaving the locking tab open
  • • Testing dry on dusty glass
  • • Replacing blades when the arm spring or linkage is the actual fault