Empty the glove box
On the 2011-2016 Regal the cabin filter sits behind the glove box, and the whole box must come out to reach it. Park, switch the ignition off, and empty the glove box completely first.
2011–2016 Buick Regal
By Ray Delgado ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026
Save $72 by doing it yourself! Shop cost: $100
Quick answer: Cabin Air Filter Replacement on a 2011–2016 Buick Regal is rated Easy and takes about 20–30 minutes. You'll need 3 tools for this job, and parts cost about $28. This guide walks you through the full job step by step, including the mistakes to avoid.
| Part Name | Part Number | Price | Buy |
|---|---|---|---|
| Cabin air filter for 2011-2016 Buick Regal; verify arrows, size, and VIN/trim fitment | — | $28.00 |
About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.
💡 Pro tip: Order all parts at once to save on shipping
Follow these steps carefully
On the 2011-2016 Regal the cabin filter sits behind the glove box, and the whole box must come out to reach it. Park, switch the ignition off, and empty the glove box completely first.
On the right side of the glove box opening, a small trim panel covers the lower-right mounting screw. Pop it off with your fingers or a trim tool — it releases with hand pressure — and set it aside.
In my experience, That little side panel loves to crack if you pry it cold in winter. Work it off gently with your fingertips, and if it's stiff, warm it with your hand for a minute first.
Inside the glove box are four hex-head 9/32-inch screws holding the box to the dash. Remove all four with a 9/32-inch socket or nut driver — the bottom-right one was behind the side panel. They're identical, so order doesn't matter.
From my bay, Start every screw by hand here, every time. The dash plastic strips with almost no effort, and a stripped screw hole on the glove box means the box rattles for the rest of its life.
With all four screws out, pull the glove box assembly straight out of the dash and set it aside. The rectangular filter housing sits directly in front of you on the blower case.
Release the clip or tab on the filter cover and pull the cover off. Slide the old filter out and note the airflow arrow's direction before discarding it. Wipe or vacuum dust and debris out of the empty housing.
Slide the new filter in with its airflow arrow matching the old one, making sure it sits flat and fully seated. Refit the filter cover and press until its clip seats — the cover should sit flush with no gaps.
Set the glove box back in and start all four 9/32-inch screws by hand, bottom-right first, then snug them. Do not overtighten into the plastic. Pop the trim panel back on, close the box, and run the fan to confirm strong airflow.
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
2011–2016
2011–2016
2011–2016
2017–2022
2017–2022
2017–2022
Acura CL · 2001–2003
Acura ILX · 2013–2022
Acura Integra · 2023–2026
Acura RDX · 2010–2012
Acura RDX · 2019–2024
Acura RL · 2005–2012
Acura RLX · 2014–2020
Acura RSX · 2002–2006