← Back to Chevrolet Silverado 1500 Guides

2019–2024 Chevrolet Silverado 1500

2019-2024 Chevrolet Silverado 1500 - Change Oil Tutorial

By Ray Delgado ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026

🔧🔧 Moderate 45 minutes $40 DIY 2 views

Save $100 by doing it yourself! Shop cost: $140

Quick answer: Change Oil Tutorial on a 2019–2024 Chevrolet Silverado 1500 is rated Moderate and takes about 45 minutes. You'll need 7 tools for this job, and parts cost about $40. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$40.00
Oil spec 5.3L V8
Capacity 8.0 qt with filter Viscosity 0W-20 Spec dexos1
Part Name Part Number Price Buy
Engine Oil (0W-20 Full Synthetic) — $30.00
Oil Filter — $10.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Prepare (8.0 qt, 0W-20 Dexos1!)

5.3L V8 (L82/L84): 0W-20 Dexos1 Gen2/Gen3 full synthetic, 8.0 qt (7.6L) with filter — big sump, don't underfill. Need: 0W-20 Dexos1 (two 5-qt jugs), ACDelco PF63, large drain pan, funnel. Some 2019+ 5.3Ls consume oil (DFM) — check the level between changes.

🔧 Mechanic's note — Tom Becker

Eight quarts is a lot of oil — make sure your drain pan actually holds it before you pull the plug. I've seen 8-quart sumps overflow a 6-quart pan and turn a driveway into an oil slick.

2

Drain the Old Oil

Position the large drain pan and remove the drain plug — expect a full 8.0 quarts, so make sure the pan is big enough. If significantly less drains out, your 5.3L may be consuming oil (DFM-related); check the level regularly.

3

Replace PF63 Filter

Remove the old PF63 spin-on filter. Install the new PF63 — hand-tighten plus a quarter turn. Ensure the old gasket came off. Use the PF63, not a cheap generic — with 8 quarts of oil, the filter does important work.

4

Reinstall Drain Plug (18 ft-lbs)

Reinstall the drain plug. Torque to 18 ft-lbs — use a torque wrench; don't over-tighten the aluminum pan.

5

Add 8.0 Quarts of 0W-20

Add 8.0 quarts (7.6L) of 0W-20 Dexos1 full synthetic through the filler cap. Use ONLY Dexos1-approved 0W-20 — the 5.3L has used 0W-20 since ~2013 (not 5W-30). Check the dipstick after filling.

6

Check Level, Leaks, Reset Monitor

Start the engine and check for leaks at the drain plug and filter. Run 30 seconds, shut off, recheck the level, and top up if needed. Reset the oil life monitor. Interval: 7,500 miles / 12 months (or per monitor).

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Not allowing the engine to cool before starting the oil change
  • • Over-tightening the oil filter during installation
  • • Failing to properly dispose of used oil