← Back to GMC Canyon Guides

2015–2022 GMC Canyon

2015-2022 GMC Canyon — Wiper Blade Replacement

🔧 Easy 10-20 minutes $35 DIY

Save $25 by doing it yourself! Shop cost: $60

Quick Video Tutorial

Parts You Need

Click links to purchase (we earn from qualifying purchases)

Total Cost
$35.00
Part Name Part Number Price Buy
Front/rear wiper blade set for 2015-2024 GMC Canyon; verify lengths and connector type — $35.00

About prices: shown prices are estimates from typical Amazon listings and change frequently, and cheaper alternatives may be available. Confirm the current price on Amazon before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Confirm blades and adapters

Measure or verify the front/rear blade lengths and connector style for the 2015-2024 GMC Canyon. Compare every replacement adapter before removing the old blade.

2

Protect the glass

Lift one arm on the 2015-2024 GMC Canyon at a time and place a folded towel on the windshield. Never allow a bare spring-loaded arm to snap onto the glass.

3

Remove the old blade

Release the locking tab or pin on the 2015-2024 GMC Canyon and slide the old blade off without bending the arm. Retain any vehicle-specific adapter that the new blade requires.

4

Install and lock the new blade

Slide the correct blade onto the arm of the 2015-2024 GMC Canyon until the latch clicks, then tug lightly to confirm it is locked and rests in the original position.

5

Test with washer fluid

Lower the arm gently, fill or check washer fluid, and test the 2015-2024 GMC Canyon on wet glass. Replace a damaged arm or investigate streaking caused by glass contamination or linkage problems.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Guessing blade lengths or connector type
  • • Letting the bare arm strike the windshield
  • • Installing the blade backward or leaving the locking tab open
  • • Testing dry on dusty glass
  • • Replacing blades when the arm spring or linkage is the actual fault