Quick answer: Spark Plug Replacement on a 2011–2017 Chevrolet Caprice is rated Advanced and takes about 1-3 hours. You'll need 4 tools for this job, and parts cost about $115. This guide walks you through the full job step by step, including the mistakes to avoid.
| Part Name |
Part Number |
Price |
Buy |
| Correct spark plug set for the gasoline/ICE engine in 2011-2017 Chevrolet Caprice; verify engine, heat range, gap, and VIN fitment |
— |
$115.00 |
|
| Coil-boot seals or ignition coils only if inspection finds damage Optional |
— |
$35.00 |
|
About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.
💡 Pro tip: Order all parts at once to save on shipping
Step-by-Step Instructions
Follow these steps carefully
1
Confirm engine and plug fitment
Confirm the engine in your 2011-2017 Chevrolet Caprice: the 3.6L LFX V6 takes NGK LTR6IX-11 (stock #6509, or ACDelco 41-988) — buy 6 — while the 6.0L L77 V8 takes NGK 94567 ruthenium plugs gapped at 0.040 in — buy 8. Both arrive pre-gapped; verify the box matches your owner's manual rather than re-gapping. Scan for P0300-series misfires first.
2
Cool and expose the plugs
Let the engine cool completely and disconnect the negative battery cable. Remove the engine cover. On some Caprices the strut tower brace must come off for coil access. The coils sit on top of each bank.
3
Remove coils and clean wells
Unplug each coil connector, remove the hold-down bolt, and lift the coil straight out. Blow or brush every plug well clean before loosening anything — rear-bank wells collect debris against the cowl. Work one cylinder at a time to keep coils and connectors matched.
4
Remove the old plugs
Remove the old plugs with a 5/8 in spark-plug socket and compare reach and electrode wear. Check the pre-set gap against your manual's spec (the L77's is 0.040 in) without prying on precious-metal tips.
5
Reconnect and verify
Reinstall the coils, connectors, brace, and cover; reconnect the battery. Start the Caprice and scan for returning misfire codes. The LFX should idle turbine-smooth and the L77 with its deep V8 rumble.
All Done!
Test your repair before closing everything up. If something doesn't work right, double-check your steps.
⚠️ Common Mistakes to Avoid
- • Using the wrong plug or assuming a pre-gapped plug needs no verification
- • Blowing debris into an open cylinder or plug well
- • Cross-threading a plug or tightening it without a torque wrench
- • Overusing anti-seize or dielectric grease on the plug threads
- • Mixing coil connectors or ignoring a misfire after reassembly