EZCarFix DIY Auto Repair
← Back to Chrysler Sebring Guides

2001–2006 Chrysler Sebring

2001-2006 Chrysler Sebring — Wiper Blade Replacement

By Tom Becker ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Oct 22, 2026

🔧 Easy 10–20 minutes $66 DIY

Quick answer: Wiper Blade Replacement on a 2001–2006 Chrysler Sebring is rated Easy and takes about 10–20 minutes. You'll need 1 tool for this job, and parts cost about $66. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$65.98
Part Name Part Number Price Buy
Driver wiper blade, 22" Bosch 22A $32.99
Passenger wiper blade, 22" Bosch 22B $32.99

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Confirm the correct blade sizes — sedan/convertible vs coupe

This guide covers the sedan and convertible; if you have the coupe, buy 24 and 21 inches instead. There is no rear wiper on any Sebring of this generation.

🔧 Mechanic's note — Tom Becker

Here's what I do: The coupe-vs-sedan trap is real — same badge, completely different car. Check your door jamb for the body style before you buy, because 24+21 on a sedan looks 'close enough' until the first rain.

2

Note the 9x3 J-hook attachment

This is the simplest and most common wiper attachment ever made: the blade's adapter threads through the hook's curve and a locking tab snaps shut.

3

Lift the arms — no service position needed

With the ignition off, lift the driver-side arm away from the glass until the hinge holds it upright. Lift only one arm at a time so the other side stays down as a visual reference.

4

Slide the old blade out of the hook

If the old blade has been on the car for years, the adapter may be seized to the hook with corrosion; a gentle wiggle side to side frees it, but never yank straight down on the arm itself.

5

Fit the new 22-inch blades and latch them

Give the blade a firm tug toward the tip of the arm to confirm it is locked — on a Sebring, a blade that is threaded but not latched will slide right back out the first time the wipers run.

🔧 Mechanic's note — Ray Delgado

I never skip this: Threaded but not latched is the classic Sebring self-own — the blade looks perfect until the first wipe launches it across the hood. That firm tug is the whole test.

6

Check blade symmetry before lowering the arms

Because both front blades are 22 inches and the adapters are identical, it is easy to install a blade slightly off-center in the hook — it will look fine but wipe crooked.

7

Confirm blade clearance, top up fluid, and wipe the cowl

Also confirm the two blades do not collide at the center of the windshield; if they touch, one adapter is seated off-center. Top up the washer fluid if needed, and give the cowl area a quick wipe so leaves do not clog the washer nozzles.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Ordering coupe-sized blades (24/21) for a sedan or convertible — the Sebring coupe is a different car with different wiper sizes; confirm your body style.
  • • Reusing a tired universal adapter on the new blade — if the adapter is cracked, the blade will rattle on the 9x3 hook.
  • • Forcing the blade into the hook without opening the adapter's locking tab, which bends the hook.