EZCarFix DIY Auto Repair
← Back to BMW M5 Guides

2019–2024 BMW M5

2019-2024 BMW M5 - Engine Air Filter Replacement

By Ray Delgado ✓ Certified Mechanic · Published Sep 21, 2026 · Updated Nov 6, 2026

🔧 Easy 10-20 minutes $20 DIY

Save $70 by doing it yourself! Shop cost: $90

Quick answer: Engine Air Filter Replacement on a 2019–2024 BMW M5 is rated Easy and takes about 10-20 minutes. No tools are required for this job, and parts cost about $20. This guide walks you through the full job step by step, including the mistakes to avoid.

Quick Video Tutorial

Parts You Need

Total Cost
$20.00
Part Name Part Number Price Buy
Engine air filters (pair) — $20.00

About prices: shown prices are typical retail averages and change frequently; cheaper alternatives may be available. Confirm the current price before buying.

💡 Pro tip: Order all parts at once to save on shipping

Step-by-Step Instructions

Follow these steps carefully

1

Prep and locate the air box

Park on level ground, brake set, ignition fully off. Pop the hood and find the two filter boxes — one per bank. Let a hot engine cool first. No tools needed — the boxes are clip-held.

2

Open the air filter housing

Start on one side: pop off the plastic covers over the airbox area with a light upward pull, then gently lift the center pins and remove the plastic pop rivets with two flat-blade screwdrivers. Loosen the hose clamps on the air hose and remove the two bolts holding the metal brace (plus the bolt for the rubber shield on the driver's side). Finally, loosen the six bolts securing the air box cover -- they're captive, with retainers inside the lid so they can't drop into the engine bay. Lay the pop rivets, brace bolts, and hose clamps out in order -- reassembly is the reverse and the hardware all looks similar.

3

Remove the old filter and clean

Lift the air box cover and pull the old panel filter out, noting its orientation. You'll also see the charcoal filter clipped inside the cover -- it pops out with a flat-blade screwdriver if you want to inspect it, though the stock setup keeps it in place. Vacuum dust and debris from the bottom of the box and wipe the sealing lip clean, keeping grit out of the intake opening. Repeat the whole process on the second airbox.

4

Install the new filter

Set both new filters in, same orientation as the old ones, seated flat. Lower each lid, seating the sealing edge squarely, then snap every clip shut. Work one box at a time so nothing gets mixed up.

5

Reseal and verify

Confirm every clip on both lids is shut — a loose lid lets unfiltered air into the turbos. Close the hood, start the engine, and idle a minute listening for intake whistles. BMW's interval: roughly every 30,000 miles.

🔧 Mechanic's note — Ray Delgado

From my bay, A loose lid lets unfiltered air straight into the turbos — that's a far more expensive mistake on an S63 than on a regular engine, so double-check every clip.

All Done!

Test your repair before closing everything up. If something doesn't work right, double-check your steps.

⚠️ Common Mistakes to Avoid

  • • Installing the filter upside down or unseated so unfiltered air bypasses the element
  • • Leaving debris in the housing that then gets sucked into the intake
  • • Forcing clips/screws and cracking the plastic air box lid
  • • Reusing a heavily clogged filter instead of replacing it